How much does AC repair cost?

Typical repairs run $185-$650 depending on the fault. Capacitor and contactor replacements are on the lower end; blower motor or compressor work is higher. The $89 diagnostic fee applies toward whatever repair we do.

Should I repair or replace my AC?

Depends on age and the repair cost. If your system is under 10 years old, repair almost always makes sense. Past 15 years, a $1,500+ repair usually isn't worth it. We'll give you the honest answer during the diagnostic.

How fast can you get here?

For emergency AC-out calls, we try to respond within the hour for Edmond and same-day for the rest of the metro. Call us and we'll give you a realistic ETA.

Do you service post-2013 rebuild homes in Moore?

Yes, we work on both rebuild homes and original construction. Rebuild homes often have modern high-efficiency equipment that has specific diagnostic needs.

How much does AC installation cost?

Typical residential installations range $4,800-$11,500 depending on size, efficiency tier, and whether ductwork or electrical work is needed. We give firm quotes after the in-home estimate.

How long does installation take?

Most standard replacements are done in one day. Larger systems or jobs involving ductwork can take 2-3 days.

How much does an AC tune-up cost?

Standard AC maintenance runs $99-$149 depending on system type and whether it's part of a maintenance plan. Ask about our annual plan for discounted rates.

When should I schedule maintenance?

Spring is ideal for AC — before the first heat wave puts load on the system. Fall is ideal for furnace maintenance. Many customers do both at once.

Will maintenance find problems before they happen?

Often yes. A capacitor testing weak, a slightly low refrigerant charge, or a dirty coil can all be caught and addressed before they cause a breakdown.

How much does furnace repair cost?

Most furnace repairs run $200-$700 depending on the part. Flame sensors and igniters are on the lower end; inducer motors, gas valves, or control boards run higher. The $89 diagnostic applies toward the repair.

Is it safe to keep using my furnace if it has a warning light?

Depends on what the code says. Some warnings are non-safety issues (air filter dirty, pressure fluctuations). Others — especially anything indicating heat exchanger damage — mean shut it down and call us.

Can you fix any brand of furnace?

Yes. We work on all major brands including Carrier, Trane, Lennox, Goodman, Rheem, York, American Standard, and older units that are out of warranty.

How much does a new furnace cost?

Installed furnace replacements typically run $3,500-$7,500 depending on size, efficiency, and whether venting or gas line work is needed.

Home / Areas Service Areas / Luther, OK

HVAC Services in Luther, Oklahoma

Heating and cooling service for Luther homeowners — AC repair, furnace service, heat pumps, and 24/7 emergency response. Licensed by the Oklahoma CIB since 2009. Serving all Luther neighborhoods along Historic Route 66 and the Hogback Road corridor.

📞 (405) 413-0583 💬 Text Us Request a Quote →📅 Book Online

📋 OK CIB #00125054🏆 ⚡ Same Day

ARP Heat And Air service van and technicians serving HVAC Services in Luther, Oklahoma

💳

HVAC Financing — From $79/month

New AC, furnace, or full HVAC system without draining savings. 0% APR for qualified buyers. Same-day soft-credit approval. No prepayment penalties. Combine with federal tax credits and Oklahoma utility rebates for maximum savings.

See Options →

❄️ AC Repair 🔧 AC Installation 🌬️ AC Maintenance 🔥 Furnace Repair 🏠 Furnace Installation ♨️ Heat Pump Services 🌡️ Thermostat Services 🚨 Emergency HVAC 🧊 Ductless Mini-Splits 🌿 Indoor Air Quality 🏢 Commercial HVAC 🔩 Ventilation Services

About Luther

HVAC Services Tailored to Luther, OK

Common HVAC issues in Luther: the Cross Timbers oak canopy drops heavy pollen and leaf debris that clogs condenser coils, most homes use propane or electric heat rather than natural gas, many older townsite homes have original ductwork from the 1950s–1970s, and the area's open elevation produces strong northwest winds in winter that stress heat pump performance.

From our Edmond office, Luther is a 28-minute drive northeast via Covell Road east to SH-66, or via the Hogback Road I-35 interchange. We service all properties in the 73054 ZIP code, including homes along SH-66 (Historic Route 66), Luther Road, Hogback Road, Pecan Street, Cox Lane, and Covell Road. Most Luther properties are on propane or electric heat with well and septic systems.

Luther sits along Historic Route 66 in northeastern Oklahoma County, about 22 miles from our Edmond office. It's a true rural community — large lots, oak trees, and a small-town feel that's attracted families looking for space outside the city. The Hogback Road I-35 interchange opened in 2011 and made Luther more accessible for commuters, and the area has grown steadily since. The 569 housing units are almost entirely rural — 100% of residents live in rural areas per the 2020 census.

Neighborhoods We Serve in Luther

Luther townsite (original grid near Main Street), rural acreage tracts along SH-66, Hogback Road corridor (newer development), Cross Timbers rural residential — plus every road and property in the 73054 ZIP.

Neighborhoods & Landmarks

Areas & Landmarks We Serve in Luther

Tap any Moore neighborhood or landmark below for local HVAC service details, common system issues in that area, and how fast our team can reach you.

📍