❄️ Ductless Mini Splits in Edmond, OK
Ductless mini-split installation for rooms without ductwork — Mitsubishi, Daikin, Fujitsu, LG factory-trained. Serving Edmond and the OKC metro since 2009. OK CIB #00125054. A+ BBB. 5.0★ from 100+ 5-star Google reviews.
Ductless Mini Splits in Edmond, Oklahoma
Ductless mini-split work in Edmond is mostly additions: detached workshops, garage conversions, sunroom additions where extending existing ductwork is impractical, and older homes where central air retrofitting requires unreasonable wall and ceiling demolition. We install Daikin, Mitsubishi, and LG mini-splits. Edmond-to-Edmond drive: 0–15 minutes via I-35.
The University of Central Oklahoma area has a high concentration of 1960s-1980s slab-on-grade homes with horizontal furnaces in tight closets and original 1.5-2 ton AC systems that are routinely undersized for the 1,400-1,800 sq ft floor plans they serve. We see oversized AC in the opposite extreme — newer Stone Mill Farms and Iron Horse Ranch homes where the builder spec'd 5-ton systems on 2,800 sq ft homes that need 3-3.5 tons based on actual Manual J calculations. Both extremes cause short-cycling, humidity problems, and premature equipment failure.
Edmond's location at the very northern edge of the OKC metro means a slight microclimate effect: average winter lows run 1-2°F colder than downtown OKC, and ice accumulations during the October 2020 storm were noticeably heavier on the north side. That storm took down branches across Spring Creek and dropped them onto outdoor units across the city — we replaced 30+ condenser fan motors and 12 compressors in the six weeks following. The lesson for Edmond homeowners: trim trees back from outdoor units before fall.
Edmond sits at the northern edge of the OKC metro with a continental climate — summer highs routinely hit 95-100°F, winter lows occasionally dip into the single digits during arctic fronts. The October 2020 ice storm and February 2021 cold snap (-14°F) both stressed Edmond HVAC systems heavily, exposing undersized heat strips and uninsulated attic ductwork across the city.
Edmond housing stock ranges from 1950s-60s brick ranches in the historic core near UCO to 2000s-2020s master-planned communities north of Covell Road. Older Coffee Creek and Oak Tree homes typically have 80% AFUE furnaces and 14-SEER condensers from the late 90s/early 2000s replacement cycle — many are now due. Newer Deer Creek and Stone Mill Farms construction has 95% AFUE furnaces but often suffers from oversized AC due to builder shortcuts on Manual J calculations.
Common Ductless Mini Splits Issues We See in Edmond
Across our service area, certain ductless mini splits situations come up over and over. Here are the ones we see most often in Edmond and how we approach them:
Hot or cold room a central system cannot reach
The classic use case: a bonus room over the garage, an addition without ducts, a finished basement, a master suite that is always 5°F off the rest of the house. A mini-split solves it without ductwork.
Wanting AC in a home without existing ductwork
Older Oklahoma homes (pre-1960) often have radiant or boiler heat with no ductwork. Adding central AC means tearing into walls. Mini-splits are far cheaper and less disruptive — typically 1-day install per zone.
Whole-home alternative to central HVAC
Multi-zone mini-splits (4-8 indoor heads on one outdoor unit) can heat and cool an entire home. Higher upfront cost than central, but better zone control and often lower operating costs.
Drainage issues on ceiling cassette units
Built-in condensate pumps fail over time. Most mini-split warranty repairs we see are pump-related. Easy fix when caught early.
Outdoor unit refrigerant leaks at flare fittings
Mini-split refrigerant connections use flare fittings, which can develop slow leaks over time, especially on installations where the line set was kinked or over-tightened. Refrigerant leak detection and re-flaring solves it.
How ARP Heat And Air Handles Ductless Mini Splits in Edmond
- In-home consultationWe evaluate the spaces, measure for BTU sizing, identify outdoor unit placement, check electrical capacity, and discuss indoor head options (wall, ceiling cassette, floor console, concealed ducted).
- Quote with brand optionsMitsubishi, Daikin, Fujitsu, and LG all make excellent equipment. Mitsubishi is the premium choice; Daikin and LG offer strong value. We quote 1-2 options.
- Installation daySingle-zone: 4-6 hours. Multi-zone: 1-2 days. Typically involves outdoor unit pad placement, line set routing through wall, electrical disconnect installation, indoor head mounting, refrigerant charge, and commissioning.
- CommissioningVacuum the lines to remove moisture, pressure-test for leaks, charge refrigerant, test cooling and heating cycles, set up the included remote control or smart thermostat.
- WalkthroughWe explain remote functions, filter cleaning (much more frequent than central AC filters — typically every 2-4 weeks), and warranty registration.
Typical Ductless Mini Splits Pricing in Edmond, Oklahoma
- Single-zone 9k BTU (one room): $3,500-$4,500
- Single-zone 12k-18k BTU: $4,200-$5,500
- Two-zone multi-split: $7,500-$10,500
- Three-zone multi-split: $10,500-$13,000
- Four-zone multi-split: $12,500-$14,000
- Service/repair (call-out + fix): $200-$800
A personal note
I have worked HVAC in Oklahoma County since 2009, and ARP is still small and owner-run on purpose. We fix things correctly the first time and treat Edmond customers the way I would want my own family treated — not like a ticket number.
There is a good chance I answer when you call (405) 413-0583. If I cannot, a real technician will — someone who does the work daily, not a scripted phone operator.
— Charlie, owner-operator, ARP Heat And Air
Financing from $79/month
Qualified buyers can finance at 0% APR. Standard fixed-rate financing is available for 640+ credit, and secondary options go down to 580. Because approval is a same-day soft pull, there is no impact to your credit score until you accept, and no tier carries a prepayment penalty.
See Financing DetailsDuctless Mini Splits FAQs from Edmond Homeowners
How much does a ductless mini-split installation cost?
Single-zone (one indoor head): $3,500-$5,500 depending on BTU capacity. Two-zone: $7,500-$10,500. Three-zone: $10,500-$13,000. Four-zone: $12,500-$14,000. Pricing includes equipment, installation, electrical work, line set, condensate routing, and commissioning.
Are mini-splits more efficient than central AC?
Often yes. Modern mini-splits run 18-30+ SEER2, vs typical central systems at 14-20 SEER2. The variable-speed inverter compressors throttle down rather than cycling on/off, which is more efficient. They also avoid duct losses (typically 20-30% of central system energy).
Can a mini-split heat in winter?
Yes, most modern mini-splits are heat pumps and provide both heating and cooling. Cold-climate models (Mitsubishi Hyper-Heat, Daikin Aurora, Fujitsu Halcyon XLTH) maintain rated heating capacity down to 5°F — well within Oklahoma's winter range.
What is the difference between Mitsubishi, Daikin, Fujitsu, and LG?
Mitsubishi Electric is the historical premium leader with the best cold-climate performance (Hyper-Heat line). Daikin is the world's largest HVAC manufacturer with excellent reliability and a 12-year warranty. Fujitsu offers the widest range of indoor head styles. LG has competitive pricing and strong feature sets. All four are excellent — pick based on indoor head style and warranty.
How loud are mini-splits?
Indoor heads run 19-32 decibels — quieter than a whisper. Outdoor units run 50-58 decibels — quieter than typical central AC condensers. They are much quieter than window units, which run 50-65 decibels.
Do mini-splits work in really hot weather?
Yes. Modern mini-splits maintain rated capacity up to 115°F outdoor temperature. Oklahoma summer highs (typically 95-105°F) are well within design range.
How long do mini-splits last?
12-18 years with proper maintenance. The most common failure is condensate pump failure (in ceiling cassette models) or capacitor failure — both straightforward repairs.
Do mini-splits need duct cleaning?
No ducts to clean — that is part of the appeal. The indoor head filters need to be washed every 2-4 weeks during heavy use (much more often than central HVAC filters), and the indoor coil should be professionally cleaned every 2-3 years.
Local context for mini-split installs in Edmond
Typical Edmond housing stock
Edmond's residential mix is dominated by 1980s–2000s suburban subdivisions, with older neighborhoods near downtown Edmond and the University of Central Oklahoma campus dating to the 1950s–1970s. A significant tier of newer construction (2010s–2020s) sits on the north and east edges of town.
What we typically see in Edmond
We see two main service patterns in Edmond: original 30–40-year-old systems in the 1980s subdivisions that are due for replacement or major service, and 8–15-year-old systems in the newer subdivisions that are mostly in repair-and-maintain territory.
From Charlie
Edmond is our home base — our shop is here, Charlie lives here, and Edmond is where ARP started in 2009. Typical response window from dispatch to your driveway is 15–25 minutes for Edmond customers, the shortest in the metro. Many of our longest-tenured maintenance-plan members are right here in Edmond.
All HVAC Services in Edmond, OK
AC Repair
$150-$650 typical
AC Installation
$4,000-$10,500 installed
AC Maintenance
$129 single visit · $179/year membership
Furnace Repair
$150-$800 typical
Furnace Installation
$3,500-$7,500 installed
Heat Pump Services
$5,500-$12,500 installed; repair varies
Emergency HVAC
$89 diagnostic, no overtime — same as business hours
Thermostat Services
$195-$450 installed
Indoor Air Quality
$250-$3,500 depending on scope
Commercial HVAC
Quote by project
Ventilation Services
Quote by project; basic seal $600-$1,200
Ductless Mini Splits in Nearby OKC Metro Cities
❄️ Ductless Mini Splits in Bethany
Oklahoma County · 25-40 minutes
❄️ Ductless Mini Splits in Midwest City
Oklahoma County · 25-40 minutes
❄️ Ductless Mini Splits in Moore
Cleveland County · 30-45 minutes
❄️ Ductless Mini Splits in Mustang
Canadian County · 35-50 minutes
❄️ Ductless Mini Splits in Norman
Cleveland County · 35-50 minutes
❄️ Ductless Mini Splits in Oklahoma City
Oklahoma County · 25-45 minutes