♨️ Heat Pump Services in Moore, OK
Heat pump installation, repair, and maintenance — including cold-climate variable-speed and dual-fuel systems. Serving Moore and the OKC metro since 2009. OK CIB #00125054. A+ BBB. 5.0★ from 100+ 5-star Google reviews.
Heat Pump Services in Moore, Oklahoma
Heat pump installation and service in Moore has grown significantly with the federal incentives and rising natural gas prices. Most Moore heat pump installs are dual-fuel configurations (heat pump + gas backup) or all-electric with electric-resistance backup. We size based on heating load (the limiting factor in Oklahoma), not just cooling. Drive from Edmond shop is 30–45 minutes via I-35.
Moore has been hit by two of the strongest tornadoes in modern US records — the F5 on May 3, 1999 and the EF5 on May 20, 2013 — both tracking through the city core. Whole neighborhoods in Plaza Towers, Briarwood, and Westmoore were leveled and rebuilt. As HVAC contractors we encounter that history in two ways: many post-2013 homes were built with reinforced construction and storm shelters that affect access for equipment installation and replacement, and the 2014-2017 rebuild wave is now hitting the 10-12 year mark when first-generation equipment failures begin.
Moore's pre-tornado housing stock — the homes that survived intact along the SW 4th Street corridor, around Little River Park, and in the older areas near Central Junior High — is typically 1970s-1980s slab-on-grade ranches with original ductwork in unconditioned attics. Many of these homes have ductwork leakage in the 25-40% range, which is the single biggest fixable energy-efficiency problem in Moore housing stock. We address ductwork before recommending equipment upgrades, because a new high-efficiency system pumping conditioned air into the attic via leaky duct seams is wasted money.
Moore was hit by the F5 tornado on May 3, 1999 and the EF5 on May 20, 2013 — many homes in the Plaza Towers, Briarwood, and Westmoore areas were rebuilt with reinforced construction and code-required safe rooms. Post-2013 rebuilds typically have newer HVAC equipment but tornado-prone homeowners often pay extra attention to outdoor unit anchoring and emergency backup-heat options.
Moore housing reflects waves of tornado rebuilds — 2014-2017 reconstruction is now hitting the 8-10 year mark when first-generation issues start surfacing (capacitor failures, refrigerant leaks at flare fittings, blower motor wear). Pre-1999 homes that survived have aging systems often deferred during rebuilding nearby. Country Place Estates and Stonebridge are newer subdivisions with 2010s+ construction; Highland West has 1970s-1980s ranches with original ductwork in many cases.
Common Heat Pump Services Issues We See in Moore
Across our service area, certain heat pump services situations come up over and over. Here are the ones we see most often in Moore and how we approach them:
Heat pump not heating in cold weather
Standard single-stage heat pumps lose capacity below about 35°F and need electric strip heat to keep up. If your auxiliary heat is not coming on, or your heat strips are dead, you get cold air. Cold-climate variable-speed heat pumps (Mitsubishi Hyper-Heat, Carrier Greenspeed) deliver rated capacity down to 5°F.
Outdoor unit iced over in winter
Heat pumps shed frost periodically — this is normal. But a unit fully encased in ice usually means a defrost control failure, dirty outdoor coil, or refrigerant charge issue. Do not chip the ice off; turn the system to emergency heat and call us.
High electric bills with heat pump
Most common cause: electric strip heat running too often because the heat pump is undersized, the auxiliary heat threshold is set too high, or the system has a refrigerant or airflow issue. We measure runtime and adjust the changeover setpoint.
Heat pump runs but does not warm or cool effectively
Reversing valve issue, low refrigerant, dirty coil, or undersized for the home. Diagnostics narrows it quickly.
Loud noise from outdoor unit in winter
Reversing valve operation is louder than AC mode (the valve solenoid is energized). A clunking or banging noise during defrost can be normal solenoid action — or a failing compressor. Easy to tell with diagnostics.
How ARP Heat And Air Handles Heat Pump Services in Moore
- Suitability assessmentNot every Oklahoma home is a great heat pump candidate. We evaluate electrical service capacity (200A panel preferred), ductwork condition, insulation, and your heating preferences before recommending heat pump vs furnace.
- Load calculation and equipment selectionManual J cooling AND heating load. For Oklahoma, a properly sized heat pump handles 90%+ of heating hours; auxiliary heat handles the deepest cold snaps.
- Written quote with payback analysisWe show you operating cost projections vs your current system — electricity vs gas — so you know what you are committing to.
- InstallationHeat pump installs are similar to AC installs but with additional considerations: reversing valve plumbing, auxiliary heat wiring, dual-fuel changeover control if applicable. Typical install: 1-2 days.
- CommissioningCooling AND heating cycle verification, refrigerant charge, auxiliary heat threshold setting, defrost cycle test, smart thermostat configuration with proper heat pump algorithms.
Typical Heat Pump Services Pricing in Moore, Oklahoma
- Standard 3-ton heat pump installation: $5,500-$8,500
- Cold-climate variable-speed (Carrier Greenspeed, Trane XV, Mitsubishi Hyper-Heat): $8,500-$12,500
- Dual-fuel (heat pump + gas furnace backup): $8,500-$12,500
- Heat pump repair (capacitor, contactor, motor): $200-$800
- Reversing valve replacement: $800-$1,400
- Heat pump maintenance: $129/visit or $179/year
The ARP difference in Moore
ARP has been an owner-operated HVAC business since 2009. I am not interested in being the biggest company in the metro. I am interested in doing right by the Moore homeowners who trust us — the same standard I would want for my own family.
When you call (405) 413-0583, I often answer myself. Either way you reach a real Cleveland County technician who knows the work, not a call-center operator.
— Charlie, owner-operator, ARP Heat And Air
Financing from $79/month
We keep financing simple: 0% APR for those who qualify, fixed-rate options for 640+ credit, and secondary lenders for scores as low as 580. The soft-credit approval is same-day and leaves your score untouched until you accept terms — and you can pay off any tier early with no penalty.
See Financing DetailsHeat Pump Services FAQs from Moore Homeowners
Are heat pumps worth it in Oklahoma?
For most homes, yes. Oklahoma's climate is well-suited for heat pumps — winter lows are typically in the 25-45°F range where modern heat pumps maintain 70-90% rated capacity. The deep cold snaps (single digits or below) require auxiliary heat, but those total only 50-150 hours per winter on average. Operating cost is generally lower than gas furnaces at current electricity and gas rates.
How much does a heat pump installation cost in Oklahoma?
Standard 3-ton heat pump installation runs $5,500-$8,500. Cold-climate variable-speed models (Carrier Greenspeed, Trane XV, Mitsubishi Hyper-Heat) run $8,500-$12,500 installed. Dual-fuel (heat pump + gas furnace backup) is typically $8,500-$12,500 depending on existing furnace condition.
What is dual-fuel and is it right for me?
A dual-fuel system pairs a heat pump with a gas furnace. The heat pump handles cooling and most of the heating; the furnace kicks in on the coldest days. It is the most efficient setup for Oklahoma homes that already have a gas furnace less than 10 years old — you keep your gas backup but cut overall energy use 20-30%.
Can a heat pump heat my home below freezing?
Yes, but capacity drops as temperatures fall. A standard heat pump delivers 100% rated capacity at 47°F, about 70% at 25°F, and very little below 15°F. Cold-climate variable-speed models (Hyper-Heat, Greenspeed, Trane XV) deliver near-rated capacity down to 5°F. Auxiliary electric heat strips cover the gap on Oklahoma's coldest mornings.
What about the federal tax credit for heat pumps?
The federal 25C Energy Efficient Home Improvement Credit (which provided up to $2,000 for qualifying heat pumps) expired December 31, 2025 under the One Big Beautiful Bill Act. Heat pump installations completed in 2026 or later do not qualify for federal tax credits. Oklahoma utility rebates (OG&E, PSO) are now the primary savings pathway.
How long does a heat pump last in Oklahoma?
Properly installed and maintained heat pumps last 12-18 years. The biggest factors are correct sizing (oversized units short-cycle and wear out compressors), proper refrigerant charge, and annual maintenance (twice yearly is even better — spring tune-up and fall checkup).
Is a heat pump louder than a regular AC?
Slightly. Heat pumps run more hours per year (heating + cooling) and the reversing valve clicks during mode changes. Modern variable-speed heat pumps are quieter than older single-stage units. Proper outdoor unit placement (away from bedrooms and decks) matters.
Can I replace just the outdoor unit and keep my existing indoor coil?
Generally no, not safely. Heat pumps require matched indoor and outdoor units for proper refrigerant flow, defrost coordination, and warranty coverage. Manufacturers void warranties on mismatched systems. We replace as matched systems unless there is a specific technical reason not to.
Local context for heat pump work in Moore
Typical Moore housing stock
Moore's housing is mostly 1970s–2000s residential, with significant rebuilds after the May 1999 and May 2013 tornadoes. The rebuild-era homes (post-2013 especially) tend to have above-grade safe rooms or storm shelters in the garage, which we work around when servicing equipment.
What we typically see in Moore
We see a lot of post-tornado-rebuild homes here where the HVAC was contractor-package-deal equipment rather than spec'd for the house. By year 10–12 those systems often need replacement that was foreseeable from day one.
From Charlie
Typical response is 30–45 minutes from our Edmond shop. If you have a safe room in the garage, tell us when scheduling — we plan our truck space around it so we're not blocking your access during the service. Moore is in the heart of Tornado Alley; we use ground-level condenser pads with proper tie-downs as a standard here.
All HVAC Services in Moore, OK
AC Repair
$150-$650 typical
AC Installation
$4,000-$10,500 installed
AC Maintenance
$129 single visit · $179/year membership
Furnace Repair
$150-$800 typical
Furnace Installation
$3,500-$7,500 installed
Emergency HVAC
$89 diagnostic, no overtime — same as business hours
Ductless Mini Splits
$3,500-$5,500 single-zone; $7,500-$14,000 multi-zone
Thermostat Services
$195-$450 installed
Indoor Air Quality
$250-$3,500 depending on scope
Commercial HVAC
Quote by project
Ventilation Services
Quote by project; basic seal $600-$1,200
Heat Pump Services in Nearby OKC Metro Cities
♨️ Heat Pump Services in Bethany
Oklahoma County · 25-40 minutes
♨️ Heat Pump Services in Edmond
Oklahoma County · 15-25 minutes
♨️ Heat Pump Services in Midwest City
Oklahoma County · 25-40 minutes
♨️ Heat Pump Services in Mustang
Canadian County · 35-50 minutes
♨️ Heat Pump Services in Norman
Cleveland County · 35-50 minutes
♨️ Heat Pump Services in Oklahoma City
Oklahoma County · 25-45 minutes