Is high-efficiency (95%+ AFUE) worth it in Oklahoma?

Often yes. The price difference between 80% and 95%+ AFUE is typically $700-$1,400, and the annual savings are $80-$180/year on natural gas in Oklahoma. Payback is 5-10 years. High-efficiency models also qualify for rebates and tax credits that close the price gap further.

Can I keep my old AC and just replace the furnace?

Often yes — if the existing AC is under 8-10 years old and matches the new furnace's blower CFM. We verify static pressure compatibility before recommending it. For older AC systems, we suggest matched replacement because refrigerant connections and coil sizing rarely align across generations.

What is the difference between single-stage, two-stage, and modulating furnaces?

Single-stage: ON or OFF at full burner output, lowest cost, more temperature swings. Two-stage: 65%-100% output, smoother heat and quieter operation, $400-$800 more. Modulating: continuously variable output 40%-100%, smoothest comfort and lowest bills, $1,000-$2,000 more than single-stage. For Oklahoma climate, two-stage is the sweet spot for most homes.

Will my gas line and venting handle a new furnace?

We check this during the install quote. Most existing gas lines are sized adequately, but older 1960s-70s homes sometimes need upsizing. High-efficiency 95%+ furnaces need PVC venting (the existing metal flue is repurposed or removed). If venting upgrades are needed, we quote them in writing before starting.

Home / Edmond / Furnace Installation

🔥 Furnace Installation in Edmond, OK

Gas and electric furnace installation. Right-sized for Oklahoma winters, properly vented, with combustion analysis on every install so the system runs safely and efficiently from day one. Serving Edmond and the OKC metro since 2011. OK CIB Licensed #00125054. A+ BBB. 5.0★ from 111+ reviews.

📞 Call Charlie (405) 413-0583 📅 Book Online 💬 Text Us

📋 OK CIB #00125054 🏆 A+ BBB ⚡ Response 15-25 minutes ⭐ 5.0 from 111+ reviews 💰 0% APR Financing

Edmond Furnace Installation

Furnace Installation in Edmond, Oklahoma

If you need furnace installation in Edmond, Oklahoma, ARP Heat And Air is the licensed, owner-operated HVAC company that has been serving this side of the OKC metro since 2011. Gas and electric furnace installation. Right-sized for Oklahoma winters, properly vented, with combustion analysis on every install so the system runs safely and efficiently from day one.

Our Edmond-based shop can reach Edmond addresses in roughly 15-25 minutes. Our typical Edmond customer is in Oak Tree, Fairfax, Twin Bridges, Kickingbird, Deer Creek, Coffee Creek, and the historic downtown Edmond district. We know the area, we know what Edmond's housing stock looks like inside the walls, and we know the specific HVAC problems that come up here.

For furnace installation specifically in Edmond, expect to pay $3,800-$8,500 — $3,800-$8,500 depending on AFUE rating and home size. Diagnostic visits run $89, applied toward any repair we perform. We give upfront pricing in writing before any work begins. No surprises, no commission-driven upsells.

Why Edmond homeowners choose ARP Heat And Air

ARP is owner-operated by Charlie — not a franchise, not a private-equity rollup, not a phone room. When you call, you usually get Charlie or one of our two senior techs. Edmond customers consistently tell us that this is the difference: someone who answers the phone, gives you a real ETA, and shows up when they said they would.

We hold Oklahoma CIB License #00125054 and we are a BBB Accredited Business with an A+ rating. Our Google profile is 5.0 stars across 111+ verified reviews, and our reviews specifically mention honest diagnoses (we have walked away from jobs we thought were a bad deal for the customer) and fast response times.

EPA Section 608 Universal certified for refrigerant handling. Fully insured. All work guaranteed.

Common furnace installation issues we see in Edmond

Edmond's housing stock is 1980s brick ranches near I-35, 1990s-2000s builds in Oak Tree and Fairfax, newer construction north of Covell Road, and high-end Deer Creek / Coffee Creek where larger homes often have zoned or multi-unit systems. a touch cooler than southern OKC in summer, more exposed to north winds in winter. Red clay soil causes condenser pad settlement of 3-6 degrees within a few years. That mix produces specific HVAC patterns:

What we typically run into in Edmond: AC short-cycling from oversized units in 1990s tract-built homes; duct leakage in attic runs (Edmond attics hit 140°F in July); R-22 systems still running in pre-2005 homes.

For furnace installation specifically, the failure modes we see most often are:

Wrong-size installations

An oversized furnace cycles on and off too frequently, causing premature heat exchanger wear. An undersized furnace runs constantly without keeping up. We do Manual J load calculation to size correctly.

Improperly vented furnaces

High-efficiency 90%+ AFUE furnaces use PVC venting that must be sloped, sized, and terminated correctly. Improper venting causes condensate freezing, exhaust spillage, or even carbon monoxide issues.

Gas line undersizing

A new 96% AFUE furnace may draw more gas at higher pressure than the old system. The gas line must be evaluated. We pressure-test on every install.

Skipped combustion analysis

A furnace that "fires up" is not necessarily a furnace that fires correctly. We use a combustion analyzer on every install to verify CO levels, O2, and efficiency.

How furnace installation works with ARP

Here is exactly what happens when you call us for furnace installation in Edmond:

Free in-home estimateWe size the furnace via Manual J load calculation, inspect existing venting and gas supply, and write a firm quote with no commission pressure.
Match AFUE to your home80% AFUE for budget-conscious replacement, 96-98% AFUE for long-term efficiency. We explain the payback math so you choose with the right info.
Permit + installPermits pulled, install in one day for most homes (8-12 hours), proper venting, gas line pressure test, electrical hookup.
Combustion analysis + walkthroughCombustion analyzer test before we leave. CO levels measured, O2 verified, efficiency confirmed. Then we walk you through the new thermostat and warranty registration.

Most installs done in one day, 8-12 hours. We do not stretch jobs out, and we do not invent extra "while we are here" work to pad the invoice.

Edmond service area

ZIP codes: 73003, 73012, 73013, 73025, 73034. Typical response time: 15-25 minutes from our Edmond shop during business hours. Landmarks we use to locate addresses: University of Central Oklahoma, Mitch Park, Arcadia Lake.

Edmond sits at 1,200 ft on the Cross Timbers plateau. The local climate factor that affects HVAC most: a touch cooler than southern OKC in summer, more exposed to north winds in winter. Red clay soil causes condenser pad settlement of 3-6 degrees within a few years.

For most Edmond homes, sizing typically lands at 3-4 ton systems for the typical 1,800-2,400 sq ft Edmond home. We size every install via Manual J load calculation, not by replacing whatever ton-size the previous system was.

HVAC brands we service in Edmond

We work on Carrier, Trane, Lennox, Rheem, Goodman, Amana, York, Bryant — both gas and electric. If your system is a brand not listed, we likely service it too — call and ask. We do not refuse work because of brand bias.

Frequently asked questions — furnace installation in Edmond

How much does furnace installation cost in Oklahoma?

A new furnace in Oklahoma typically runs $3,800-$8,500 installed. An 80% AFUE basic furnace is $3,800-$5,500. A 96% AFUE two-stage furnace is $5,500-$7,000. A 97-98% AFUE modulating furnace is $6,500-$8,500. Pricing depends on home size, gas line condition, and venting requirements.

80% AFUE or 96% AFUE — which is better for Oklahoma?

For most Oklahoma homes, 96% AFUE pays back in 5-8 years through lower gas bills, and qualifies for utility rebates. 80% AFUE costs $1,500-$2,000 less upfront but uses about 18% more gas. If you plan to be in the home 8+ years, 96% AFUE wins on total cost.

How long does furnace installation take?

Most replacement installations are done in a single day — 8 to 12 hours. Larger systems, gas line modifications, or vent re-routing can extend that to 2 days.

Do you do combustion analysis?

Yes — on every install. A combustion analyzer is the only tool that verifies CO levels, O2, and efficiency are within safe and correct ranges. Installers who skip this step have no way to know if the furnace is running correctly.

📞 Want to talk to the owner directly?

When you call (405) 413-0583, there is a real chance Charlie answers personally. ARP is small on purpose — we cap our service volume so that quality stays high and the owner stays involved on every job. That is not a tagline, it is the operating model.

If Charlie does not pick up, one of our senior techs will, and you will get an honest ETA on the spot. No call center, no robot menu, no "we will call you back within 48 hours."

— Charlie, owner, ARP Heat And Air · Edmond customer since 2011

💰 Financing available — 0% APR plans

New furnace installation does not have to drain your savings. We offer 0% APR promotional financing for 12-18 months on qualifying installations, plus standard fixed-rate options over 60-120 months for larger projects. Soft-credit pre-qualification does not affect your credit score.

$79 per month example for $5,500 system at standard rate

We help identify federal tax credits (up to $2,000 for qualifying heat pumps) and OG&E rebates — these stack with financing.

View Financing Plans →

Other Services in Edmond

Need a different HVAC service in Edmond?

We provide every type of HVAC service in Edmond — repair, installation, maintenance, and emergency. Each page has local pricing, response times, and city-specific notes.

❄️